Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: MopTop on November 27, 2008, 11:21:27 pm
-
A garden gate blew shut on the pole just as i was turning the corner of the house. All the force of my movement went through the middle of sect. 2 snapping it clean in half. Needless to say I'm gutted. :'(
Does anybody know if these poles can be fixed? ???
-
Yes, quite easily - but let Alex Gardiner explain...
-
That really is bad timing. :(
If it is a clean break then usually you can effect a temporary repair by taking top of the broken section and sliding it up inside the bottom of the broken section and pulling through as far as you can. This gives you a reverse overlap of between 4-10" depending on where the section snapped. Wrap some duct tape around the join to prevent splinters and keep the joint together.
The above will usually keep you going for the day. When you get home you can make this more permanent by putting super-glue between the two sections and then taping the rough edge. This can usually last for many months.
A professional repair can be obtained from this firm:
www.polerepairs.co.uk/ (http://www.polerepairs.co.uk/)
This will be as strong as the original section and costs between £15-20 for a standard repair.
-
Thanks very much for the tips Alex, I will try that today.
-
Any other queries drop me an email on alex@agardiner.co.uk and I can give you a phone call.
-
just found this on ebay
cgi.ebay.co.uk/Water-Fed-Pole-Repair-Kit_W0QQitemZ300274704132QQcmdZViewItemQQptZUK_HomeGarden_CLV_Cleaning_CA?hash=item300274704132&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A10%7C39%3A1%7C240%3A1318 (http://cgi.ebay.co.uk/Water-Fed-Pole-Repair-Kit_W0QQitemZ300274704132QQcmdZViewItemQQptZUK_HomeGarden_CLV_Cleaning_CA?hash=item300274704132&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A10%7C39%3A1%7C240%3A1318)
-
Yes I spotted that last week, cannot quite understand how it will work on different size tube sections (35-45mm) and still provide enough strength.
-
Is it just a plastic plumbing joint? Looks a bit scarey to me because i can't imagine it would be strong enough for a 60' pole?
-
Is it just a plastic plumbing joint? Looks a bit scarey to me because i can't imagine it would be strong enough for a 60' pole?
:o :o :o 60 ft up i wouldnt rely on that
-
A garden gate blew shut on the pole just as i was turning the corner of the house. All the force of my movement went through the middle of sect. 2 snapping it clean in half.
Why don't you use a cheap DIY modular fishing pole for your routine domestic work and save your SL2 for 'best'?
It'll be just as good for your normal two-story domestic work, and cost about £20.
-
never snapped my F16 or emporium but will send for one of those to keep as a spare. looks like a larger than average taper with the missing link missing :D tony- esselle pole repairs do something similar
-
A garden gate blew shut on the pole just as i was turning the corner of the house. All the force of my movement went through the middle of sect. 2 snapping it clean in half.
Why don't you use a cheap DIY modular fishing pole for your routine domestic work and save your SL2 for 'best'?
It'll be just as good for your normal two-story domestic work, and cost about £20.
got my zensor ready with a new brush, head hose, angle adapters etc, just need the hose fixing now, and im all set to go.. doesn't half feel light thou, im probably gonna throw this pole over the fence on my first clean..lol
@ MopTop
Can only imagine how distraught you can be breaking your prize SL2.. Hope you manage to get it fixed ok! Best to keep it for big jobs..