Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Jack Avery on October 31, 2008, 10:02:22 pm

Title: Looking after your RO
Post by: Jack Avery on October 31, 2008, 10:02:22 pm: Well I would like to say how helpful this site is with the advent of a slightly more technical and expensive approach to window cleaning. My 40/40 has now provided two and a half years of excellent service. I run it from tap pressure here at Wymondham. The water is around 360/70 tds going in and produces water before DI at 5 TDS. I have found cycling the water softener before production makes all the difference. If I did`nt cycle the softener it would be around 45 TDS.
Thanks for all your help advice and tips.
Title: Re: Looking after your RO
Post by: Chris Cottrell on November 01, 2008, 09:08:13 am: I agree Jack this site is a mine of info

& not seen you around this way lately
Title: Re: Looking after your RO
Post by: Jack Avery on November 01, 2008, 01:20:21 pm: Hi Chris I was in Diss Mon/Tues there again Nov 12th will keep an eye out for you.
Title: Re: Looking after your RO
Post by: Jack Avery on November 01, 2008, 01:24:13 pm: Sorry Jewel for not replying. Before I fill my tank. I get the water softener to wash its resin with salt solution. This brings the water from my RO to its lowest reading.
Title: Re: Looking after your RO
Post by: Jack Avery on November 01, 2008, 04:13:05 pm: Yes I do. I used to let my softener cycle when it wanted to but the cycle times were to far apart. Try it see if it works.