Clean It Up
UK General Cleaning Forum => General Cleaning Forum => Topic started by: drive surgeon on October 28, 2008, 10:35:38 am
-
hi guys, i got the tech clean 13 horsepower honda engine machine and i have never used the soap injection on it. i seem to have lost the instructions. is it easy to use? do i just dip the small suction hose into the soap and put lance onto low pressure fan spray and it will automatically suck the stuff through with the water? im thinking of spraying pvc cladding with tfr on low pressure then rinsing off? ???
-
yep, I dont usually bother wih it personally though.
I use a long brush and dip it in watered down tfr then brush it into the cladding, thats gives best results in my opinion.
cladding usually needs a bit of a scrub i find
-
Did your pressure washer set up come with different color tips
including a black tip. Please let me know and then I can answer your question.
Hal
General Manager
Merrill Fox Enterprises
-
hi merril or hal it has no tips, i have 2 lances, one has a turbo nozzle on and the other has a adjustable fan spray. will be ordering another machine from you after christmas.
-
The lance that you use with the adjustable fan spray end
should have a 2 position head. You should be able to pull the end of the spray head out (it only moves about a 1/4") and this will create a larger orifice in the nozzle end and activate the soap/chemical injector. If you have never adjusted your spray end before (pulled or pushed it in) it might be real hard to do so now. Hope this helps.
-
not tried it yet hal but i think it will be rusted on no doubt? :o