Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: tradman on October 19, 2008, 09:46:00 am

Title: cladding cleaning.powerwash or chemical & wfp
Post by: tradman on October 19, 2008, 09:46:00 am

have a big big job coming up for cladding clean( builders clean). whats best?, power-washing or chemical and water-fed pole? i have unlimited water supply and going to be using mewp. the window frames are aluminum powder coated.

shaun

Title: Re: cladding cleaning.powerwash or chemical & wfp
Post by: trevor perry on October 19, 2008, 01:27:50 pm

i would definately use a pressure wash it is much faster and gets better results , i find it best to use a soap lance and tfr a large area then to go back and pressure wash off it is really quick.if you want any advice i am quite local to you as i live in blackburn.

Title: Re: cladding cleaning.powerwash or chemical & wfp
Post by: BDCS on October 19, 2008, 09:43:19 pm

Put the diluted TFR into your WFP setup and brush it on then pressure wash it off after 15 mins dwell, use non caustic TFR and rinse your WFP with pure water after. You can whizz through it like this

Title: Re: cladding cleaning.powerwash or chemical & wfp
Post by: karygate on October 20, 2008, 07:15:45 am

Quote from: BDCS on October 19, 2008, 09:43:19 pm

Put the diluted TFR into your WFP setup and brush it on then pressure wash it off after 15 mins dwell, use non caustic TFR and rinse your WFP with pure water after. You can whizz through it like this

would agree with you .