Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Dean Taberner on October 15, 2008, 07:31:46 pm

Title: Pure water problem
Post by: Dean Taberner on October 15, 2008, 07:31:46 pm

Hi guys,

I have a freedom trolley with 8 25l containers with a 300gpd RO and DI.

Ive just changed my pre-filters on my RO and my resin in my DI and ive got my water back down to 000 which im really pleased about.

Im now in the process of filling up my storage tank but I also have 4 full 25l containers of 002 water in my van left over.

Would you recommend using up this 002 water or tipping it and re-filling all my containers with the 000?

Thanks in advance,

Dean.

Title: Re: Pure water problem
Post by: edd on October 15, 2008, 07:37:49 pm

anything up to 10ppm is generally ok but oooppm is the best we have used 44 ppm and it was ok so
who knows????

Title: Re: Pure water problem
Post by: AJ on October 15, 2008, 07:38:17 pm

use it, or tip it into your storage tank while it fills up with 000. it will dilute it

Title: Re: Pure water problem
Post by: Chris Galloway on October 15, 2008, 07:49:02 pm

wont make any difference, anything under 7tds will dry spotless.

Title: Re: Pure water problem
Post by: Andrew McCann on October 15, 2008, 07:49:59 pm

Use it.

002 is absolutely fine and will cause you no problems.

Andrew

Title: Re: Pure water problem
Post by: Dean Taberner on October 15, 2008, 07:52:32 pm

Thanks all for your replies,

Decision made,

Use it I will,

Dean.

Title: Re: Pure water problem
Post by: Dean Taberner on October 15, 2008, 07:53:49 pm

And thanks Andrew on your help getting it sorted in the 1st place,

Hows things,

Take care,

Dean.