Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: doak on October 03, 2008, 07:19:30 pm
-
hi
i cleaned my windows and noticed covered in white spots yet when cleaned my friends the other day everything was fine and they looked great
i have noticed my tds has gone from 000 to 002
i run roman 100gpd with built in di
i also use a booster pump for pressure and my tap tds is about 350
i have only made approx 75 litres of product water
has my resin died already
have tried shaking it and run system on flush for 15 mins
got my first three jobs to do this weekend and starting to panic argghghghghghg
cheers doak
-
The white spots may be from the salt content of the resin depending what resin you are using.
-
nothing wrong with using 002 or even a little higher. spots are from framework. some go very milky when scrubbed newer ones not so bad you just get a feel for these things after a long time. You get to know individul houses and what works for each one some need lots of rinsing others don't. I think this is where a lot go wrong as they just have one clean style and that will not work on all jobs.
Its not as easy as just waving a stick about, not t do properl anyhow! ;)
simbo