Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Slash on September 27, 2008, 05:29:41 pm
-
I have recently bought a van mount system frm Pure Freedom and my TDS was climbing so decided to change my resin vessels,however I only filled them 3/4 full and replaced them,I am getting no water and my preasure gauge is not moving,the inlets and ouitlets are the right way but still no joy,whats the problem,your input would be very much appreciated! ???
-
i just leave an inch clear at the top, which vessels do you have?
-
Sounds like an air lock - fill one at a time with the out side open, when water starts to flow connect the hose on the out side. If you have a varistream use the boost setting.
-
It sounds as if the riser tube has come detached from the di head
-
It sounds as if the riser tube has come detached from the di head
Or the riser is blocked.
-
It sounds as if the riser tube has come detached from the di head
Or the riser is blocked.
Thanks Lee,just sorted it now after all this time!!! ;D ;D ;D
-
lee you crack me up ;D ;D ;D
-
It sounds as if the riser tube has come detached from the di head
Or the riser is blocked.
Thanks Lee,just sorted it now after all this time!!! ;D ;D ;D
That good 8)