Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: geefree on September 27, 2008, 03:50:38 pm
-
hi,i have 2 small poles, they type from b&q.... but one has a thread top which is smaller than my angle adaptor thread.... and one has a cone top....
is there such a thing as an adaptor.. which fits both of these... so my angle adaptor will screw onto it, then i can put my brush on....
thanks for any help. ;)
-
do a search for : windowwashers is his user name and topic is Harris pole
he has done a vid that might help you
-
if you go to your local decorating shop they do an angle adaptor that fits onto that screw thread on the harris pole just change the top half for the top half on your angle adaptor job done
-
If you can't get one, then stick the end of your cone into boiling water to soften it, then screw it into your angle adaptor, then un-screw it and repeat the process until you see it cutting a thread for you.
Don't stick it into boiling water for to long or it will be far to soft.
-
If you can't get one, then stick the end of your cone into boiling water to soften it, then screw it into your angle adaptor, then un-screw it and repeat the process until you see it cutting a thread for you.
Don't stick it into boiling water for to long or it will be far to soft.
Top tip ;)
-
thank you all. ;)
tried the hot water... did not seem to soften, so i tried heat.. no avail..
will have to shop around ..thanks
-
You are using the plastic cone Gazz ???
I've done it 3 times with boiling water and its worked, Jouk45 has also done it a few times and its worked, I recon your doing it wrong Gazz.
-
i just drill a hole through and bolt it together. it works well and never comes off.
-
You can get an aluminium cone from Cleantech - they seem to fit inside most sorts of poles.
-
Thanks again... maybe i didnt leave it in the hot water long enough Jeff?
i will try again tomorrow evening.
just put some black soil pipe inside the roof of thevan,, my poles are now out of the way...... JOY!!!! ;D
-
ive just sold 2 end threads to a chap down south and he said they worked a treat.
-
ive just sold 2 end threads to a chap down south and he said they worked a treat.
hi , i need two types... ... cone to thread... which fits vikan and angle adaptor..... and small thread on pole.... to vikan thread
do you do both.?
thanks
-
yes mate. just give me a buzz
ask for james 0115 9394444
-
yes mate. just give me a buzz
ask for james 0115 9394444
Hi James
Mike is up and running and said to say thanks to you.
He's like a pig in the you know what lol, he said to me he should have done it years ago, Thanks for your help. ;)
-
cheers jeff. it was a struggle getting him there but we cracked it ;)