Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Bob Allen on February 20, 2005, 09:20:16 pm

Title: parts for wand help needed
Post by: Bob Allen on February 20, 2005, 09:20:16 pm

I have a twin jet wand that has suddenly started to drip alot i have undone the screw under the trigger (the nut under the trigger plunger) inside i have noticed that the spring has broken and the small rubber washer has worn
can anyone tell me the best place to buy the whole piece including spring
Many thanks Bob
p.s the joint has a letter k on it, if that means anything?

Title: Re: parts for wand help needed
Post by: *paul_moss on February 20, 2005, 09:33:08 pm

Bob sounds like rubbers are worn.
What make is the wand or what machine did it come with.

paul

Title: Re: parts for wand help needed
Post by: Shaun_Ashmore on February 20, 2005, 09:45:37 pm

Mine had started to do the same so I bought a valve repair kit a very posh name for a pin a spring and a washer not cheap but saves me from having wet legs, unless I p#ss myself!

Shaun

Title: Re: parts for wand help needed
Post by: Dennis on February 21, 2005, 09:20:18 am

The K means it's a Kingston valve.

(http://www.powrflite.com/images/parts/PX18.jpg)

Title: Re: parts for wand help needed
Post by: Bob Allen on February 21, 2005, 11:31:08 am

Thanks guys woodbridge have now discontinued the K valve and have replaced it with a P valve but i managed to get the bits i needed from Prochem
Thanks Bob