Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: gsw on September 16, 2008, 09:56:43 pm

Title: need to go from john guest to half inch hose??
Post by: gsw on September 16, 2008, 09:56:43 pm

w ww.speedfit.co.uk/part_spec.asp?s=NC448_S1

I need to be able to transfer from jg fitting to half inch hose, ideally one of these fittings but cant find one online, all help/advice/ideas appreciated

greg

Title: Re: need to go from john guest to half inch hose??
Post by: Wayne Thomas on September 16, 2008, 10:04:44 pm

Try ROman for fittings 1st, then Gardiners 2nd

Title: Re: need to go from john guest to half inch hose??
Post by: niceandclean on September 16, 2008, 10:06:13 pm

Quote from: gsw on September 16, 2008, 09:56:43 pm

w ww.speedfit.co.uk/part_spec.asp?s=NC448_S1

I need to be able to transfer from jg fitting to half inch hose, ideally one of these fittings but cant find one online, all help/advice/ideas appreciated

greg

Try RO Man, thats where i get my fittings.

Title: Re: need to go from john guest to half inch hose??
Post by: Mr H on September 16, 2008, 10:08:51 pm

Sounds like you might be fitting an inline TDS meter..........

Call Varitech in Newton Abbott....... they sell an adapter.

Regards
Mr H

Title: Re: need to go from john guest to half inch hose??
Post by: gsw on September 16, 2008, 10:13:30 pm

thanks fellas, was looking on RO man but could only see, JG stem(3/8) to 1/2" barb and would like to be able to go direct from JG to hose if possible.

thanks MR H, its not an inline tds, just the way I am trying to setup a static at home, might need to talk the plumbers merchants to see if they can order me it in.

Title: Re: need to go from john guest to half inch hose??
Post by: L.J.Thorpe on September 16, 2008, 10:27:57 pm

is this half inch into ro jg inlet by any chance ;D
or jg into half inch waste??

Title: Re: need to go from john guest to half inch hose??
Post by: Ian Lancaster on September 17, 2008, 04:04:34 pm

Half inch JG is a tight fit inside standard half inch hose.  Just push it in and put a couple of hose clips on it.  My inlet to my booster pump for my 40-40 is like this, and it's never leaked and I didn't even bother with the hose clips.

Title: Re: need to go from john guest to half inch hose??
Post by: Alex Gardiner on September 17, 2008, 04:43:27 pm

Which size JG hose are you trying to go from?

We have a variety of fittings that go from 1/4" JG to various fittings inc. 1/2", we also supply an adapter that goes from standard male hozelock to 1/4" JG hose.

Title: Re: need to go from john guest to half inch hose??
Post by: gsw on September 17, 2008, 09:57:29 pm

thanks all was having a thick t w a t moment...all sorted now!