Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: doak on September 05, 2008, 07:09:02 pm
-
hi guys and gals
i just bought me and ro unit with di
but cant figure out how to connect it to my outside tap
how do you get standard garden hose pipe to fit to the unit is there a special adaptor aval
what i want to do is
garden tap to
pressure pump to
ro with di unit attached to
water butt for pure water and a
water butt for waste water
also the pump was sent to me and its got what looks like a tamia radio controlled car connector and no other means of attaching the electric cable arghhghghghg
cheers ??? ??? ??? ???
-
You need something like this, i think. With a length of 6mm pipe to go from here to booster pump.
www.ro-man.com/shop/product_info.php/cPath/40/products_id/52
-
Stick some pictures up to help us get a better idea of your needs ;)
-
ok will post piccys tomo
sussed me pump prob need a transformer
if you can imagine out side tap and shed approx 10 feet apart, i want to run the hose between them so ro will be in shed but need to convert thin ro pipe to standard garden hose or do i run direct from the tap the small pipe
;D
-
My 200gPD Ro came with a blue male screwed into the RO and I just attached my hose pipe from the tap to it, the other RO I have,has a small pipe, one end push's into a hose pipe and the other goes to a small bore tube, I'm almost sure RO-Man will do both types of fittings for you.
-
ok will post piccys tomo
sussed me pump prob need a transformer
if you can imagine out side tap and shed approx 10 feet apart, i want to run the hose between them so ro will be in shed but need to convert thin ro pipe to standard garden hose or do i run direct from the tap the small pipe
;D
what you need is on that link. You want a length of 6mm pipe to run from your tap to your ro. Then a 6mm connector to screw onto your tap.
Forget about trying to use your hosepipe. The above is the simplest.
-
push a short length of microbore onto the ro pipe
then push microbore into garden hose
jubilee each end
easy and it works ;)
-
sorted links up a treat
where is the best place to put the booster pump? (outside tap then about 5 meters to shed then ro and di unit) should i put it on at the first point of entry to shed ? on the tap inside the house or inbetween ro and di unit (100gpd ro with di unit)???
cheers ???