Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: kris martin on September 02, 2008, 07:51:44 pm

Title: How Easy is it?
Post by: kris martin on September 02, 2008, 07:51:44 pm

how easy is it to alter the pressure on the shurflo pump, the pressure keeps bursting my hozelock hose.....    i know what you have to do but can it damage the pump?

Title: Re: How Easy is it?
Post by: dmlservices on September 02, 2008, 08:10:12 pm

hi
you really need to fit a varistream or a by pass , pump will not last long if you dont

daz

Title: Re: How Easy is it?
Post by: kris martin on September 02, 2008, 08:34:08 pm

i have a flow master which shuts it down but pumps 100psi before it does shut it down...

Title: Re: How Easy is it?
Post by: john tomkins on September 02, 2008, 08:59:38 pm

Just alter the setting of the pressure switch then, don't remember which way but you'll soon tell ;D

Title: Re: How Easy is it?
Post by: Nathanael Jones on September 02, 2008, 09:01:11 pm

Quote from: kris martin on September 02, 2008, 07:51:44 pm

how easy is it to alter the pressure on the shurflo pump, the pressure keeps bursting my hozelock hose.....    i know what you have to do but can it damage the pump?

There's a little alan key on the bottom of the plastic bit of the pump,... turn it anti-clockwise and you can go as low as 60 psi,.. which is still enough to get water to the top of a 60' pole.