Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: andrew.ralph@homec on September 01, 2008, 09:16:14 pm

Title: hose reels
Post by: andrew.ralph@homec on September 01, 2008, 09:16:14 pm

hi all can any body tell me best fittings from pump to reel using hozelock at the moment and tending to leak a bit cheers andy

Title: Re: hose reels
Post by: Ian Lancaster on September 02, 2008, 07:03:23 pm

Put a hose barb type fitting on the pump - run a length of reinforced plastic hose to the hosereel.  Plastic Hozelock is a waste of time as they always wear out and leak, and pop off under pressure.  Get a metal hosereel and fit a 90degree brass connector to the inlet side.  A brass hozelock type fitting on the end of the high pressure hose will fit the elbow.  Because the connection between the hose and the elbow isn't subject to turning (that happens inside the connector) it won't wear out.

Title: Re: hose reels
Post by: andrew.ralph@homec on September 02, 2008, 09:43:22 pm

hi ian wheres the best place to buy these thanks andy