Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: see clear lee on September 01, 2008, 09:12:59 pm
-
my 6x12 di bottle is popping the hozelock connectors every now and again so the thread must be kaput,anyone know if these are available to buy separate ( the top which screws into the di )or is it a case of ...........wfp .............thatll be £60 for a bottle :(
-
It will be more to do with your connectors than the di head, try changing the connectors on your hose and di head.
-
my 6x12 di bottle is popping the hozelock connectors every now and again so the thread must be kaput,anyone know if these are available to buy separate ( the top which screws into the di )or is it a case of ...........wfp .............thatll be £60 for a bottle :(
i what da said doesnt work cleaning spot sell them
-
i think i got a duff thread from day one , it came with the elbow fittings on which leaked no matter how much ptfe tape i put on , then i swapped for the hozelock and again wads of ptfe and now its just wrecked, ive tried other fittings and it always the same , other that bonding on the fittings which is a option unless i can source a replacement, then ill have to just cough up the £60
-
i what da said doesnt work cleaning spot sell them
cheers will check them out
-
when you say you use loads of ptfe tape how many times roughly do you go round the male connecter
-
its at the stage now that to stop water spurting out ive got to wrap it around untill its like a bulb and the di threads cut into the tape to hold it in place, looks like itll have to be a new bottle as cleaning spot only do the 3 way head replacement :(
-
its at the stage now that to stop water spurting out ive got to wrap it around untill its like a bulb and the di threads cut into the tape to hold it in place, looks like itll have to be a new bottle as cleaning spot only do the 3 way head replacement :(
i thought they were all three way both mine are any way,one of them is permantly blanked off also instead of tape try horses hair and boss white it should seal it
-
window cleaning warehouse do new tank heads mate .
-
Gardiner pole systems, NITO DI fittings, you won't ever have any problems.
www.gardinerpolesystems.co.uk/acatalog/DI_Resin_Beads_and_TDS_Meters.html (http://www.gardinerpolesystems.co.uk/acatalog/DI_Resin_Beads_and_TDS_Meters.html)
Dear, but worth it.
-
thanks daveshaw and tim , will get it sorted with both of them, they look better fittings .
-
DI Straight after pump, 100PSI no problem, no leaks. :)
I'm very happy with them.