Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Jewel Cleaning on August 17, 2008, 07:25:02 pm

Title: 001.. Is it ok to use?
Post by: Jewel Cleaning on August 17, 2008, 07:25:02 pm

Just filling my tank..

Tested the water... its at 001, it's the first time its gone up, so I'm thinking it's probably the resin.

Is 001 still ok to use?  (Until I get more resin!)

Title: Re: 001.. Is it ok to use?
Post by: NWH on August 17, 2008, 07:27:16 pm

It`s fine,i`ve used water up to 18 before without realising it but still had good results.You wouldn`t get good results with that on first cleans though lol.

Title: Re: 001.. Is it ok to use?
Post by: matt on August 17, 2008, 07:35:22 pm

my water was 36 when my RO went funny

still good results

Title: Re: 001.. Is it ok to use?
Post by: johns window kleen on August 17, 2008, 07:43:47 pm

Checked mine today it was at 006. Bit bugged about this as it was 001 Monday.
 Did own house to check if all ok and the result was spotless, So try on your own for some reassurance.

Title: Re: 001.. Is it ok to use?
Post by: RO-Sheen on August 17, 2008, 09:31:15 pm

I remember the days when my TDS was 001..............................aaahh, those were the days!!!

 For the past year Ive been working at between 004 and 006 since my DI has run out on my Reach and Wash and its still spotless results!
Like johns WC service said, try out on your own if you are unsure

Title: Re: 001.. Is it ok to use?
Post by: STEVE-UK on August 17, 2008, 09:38:55 pm

i bin mine when they get to 010,i find i spend more time brushing & rinsing if its any higher

Title: Re: 001.. Is it ok to use?
Post by: stevieg on August 19, 2008, 09:26:28 pm

dont check mine,couldnt begin to tell you what my reading is !