Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: lee_dewing on August 16, 2008, 01:18:50 pm

Title: mini pole
Post by: lee_dewing on August 16, 2008, 01:18:50 pm

hi
I WAS THINKINKING OF HAVING A mini telescopic pole to clip onto my tool belt.

i use a freedom trolley and an ecolite brodex pole 18 ft pole that does 98% OF MY domestic round,
i either do downstairs windows trad or pole depending on speed and tight spaces.

so want a telescopic mini pole 60cm to 1 metre ish.

i know you can buy mini poles £40 i think,
thought i could do something myself and have male female microbore connectors on brodex pole and brush then simply unscrew put on mini pole for downstairs ones.

anyone done this converted mini unger ettore pole? any advice thanks lee.

Title: Re: mini pole
Post by: lee_dewing on August 18, 2008, 04:13:36 pm

no-body likes me  :'(

Title: Re: mini pole
Post by: clean on August 18, 2008, 04:16:59 pm

What you are best doing for such a small pole  is buy a harris ally pole and cut it down  ;)

Title: Re: mini pole
Post by: Ian W on August 18, 2008, 07:22:02 pm

Pulex do one at about a meter. Unger do one at about 2ft. I use the Unger one and find it quite good, but a little too short.
I think the Pulex one is about 5 quid, so you won't break the bank if you buy one.

Title: Re: mini pole
Post by: L.J.Thorpe on August 18, 2008, 11:11:14 pm

cleantech sell a 2by2 unger drilled and with an ally end cone threaded for vikans
or just do the same yourself :)
all the bits are out there

Title: Re: mini pole
Post by: adixon on August 18, 2008, 11:18:07 pm

If you go to your local paint and decorating shop they do a 3 section alloy harris pole closed length is about 2.5ft £5.95 plus vat and convert it ideal for downs

Title: Re: mini pole
Post by: adixon on August 18, 2008, 11:19:31 pm

I only paid £12 for my £17ft harris pole