Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: dmlservices on July 26, 2008, 04:32:36 pm
-
hi
been using a varistream/100 p.s.i. surflo combo since last october. this week been taking longer to cut out , pressure builds up and on realising trigger , jets burst water out like a pressure washer , way to much for wcing . so i decided to adjust blue dial - i did this when i initially set it up. anyway heres the problem, even turned down to min. pump continues for 12-15 secs any ideas hope its not broken as it is still under warranty, but hassle sending back waiting for replacment
cheers
daz
-
Hi Daz.
Have a look for ANY water leaks at all AFTER the pump and I do mean any at all. Anywhere between the pump and your pole trigger.
For once I am saying I hope that someones set up is leaking somewhere :o
Also check that you electrical connections are all OK.
Hopefully it will get sorted.
Andrew
-
hi andrew
have checked for leaks , and electical connections , recharging battery will see if this makes any differance
daz
-
I had the same problem! - I took the pressure switch apart put it back together and all seems to be ok - give it a go!
-
hi
you do not use the pressure switch when using a varistream,you dissconnect the wires and wire straight into varistream. or have i missed something?
daz
-
No Daz. You have it right.
You disconnect the wires from the pressure switch.
Andrew
-
update
charged battery , now works fine- presume battery got really low and confused varistream.
daz
-
Nice one Daz :)
I forgot that I have encountered this before.
Andrew