Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: fergus77 on July 19, 2008, 01:42:25 am
-
Silly question really, but how do you put them on? I've got mines jammed on in between the blade and upper most edge of the squeegee, at the ends. Is this right with the teeth on them against the channel?
-
Silly question really, but how do you put them on? I've got mines jammed on in between the blade and upper most edge of the squeegee, at the ends. Is this right with the teeth on them against the channel?
open them up teeth on blade , when i used them i did this end in tight, then pulled rubber tight add click and push in do the same on the last.
your welcome to give me a call in the morinfing after 10 am on 01234 870 225 or 07788732 789 I wil answer your questions m8 no probs, I was in the same boat once ;)
Ian
-
Ah, so the raised bit on the end of the clip sits against the channel? Think i've got them in upside down ::)
-
Ah, so the raised bit on the end of the clip sits against the channel? Think i've got them in upside down ::)
the raised bit holds the blade in when pushed in
::)i used ettoree ones
-
cheers for the reply Ian, if i get into bother i'll give ye a shout ;D