Clean It Up

UK Floor Cleaning Forum => Frequently Asked Questions & Useful Resources => Topic started by: kerrpmiddleton on July 16, 2008, 09:27:38 pm

Title: cimex encap
Post by: kerrpmiddleton on July 16, 2008, 09:27:38 pm

I am considering purchasing the Cimax Encap system for cleaning office carpets and other large areas.   I have a truck-mount and portables, however, because the premises are 5 storeys with sealed windows this creates difficulties, hence why I am considering this purchase.

Is there anyone out there who already has one, or has a similar system which would do the job.  I have looked at a couple of other systems - much help would be appreciated.

 :)

Title: Re: cimex encap
Post by: gwrightson on July 17, 2008, 06:34:29 am

kerry

i purchased one after using one after trying out anothe c/c cimex,
i wouldnt be with out it now.

instant results, great for a quick demo to custy, and the speed of cleaning outstrips any other method,
imho  .
 the downfall , so some may point out is the post vaccing, how ever 99% percent of the time i stress the importance of this to custy and they are happy to do this themselves, usualy with inhouse cleaners.
geoff.

Title: Re: cimex encap
Post by: kerrpmiddleton on July 17, 2008, 08:35:02 pm

thanks for advice where did u get it and how much will i pay for it !!!!!

Title: Re: cimex encap
Post by: PaulKing on July 25, 2008, 09:08:21 am

i have a rs38 cimex machine without brushes ( 60 quid from cimex) that you can have cheap if you need to try it out

Title: Re: cimex encap
Post by: Jewel Cleaning on August 26, 2008, 02:57:54 pm

Does anyone here use a rotary machine  like oreck orbitor for this encap tyoe solution?

Any comments?

Title: Re: cimex encap
Post by: carlton care on August 26, 2008, 09:31:58 pm

The Oreck is too small. It can be useful for small areas but you really need a 15" or bigger. You can also use a low speed rotary to do the same job as an oscillator.

robert m