Clean It Up
Market Place => Used Equipment For Sale/Wanted => Topic started by: advancedclean on July 09, 2008, 09:22:58 am
-
I'd like to buy pref second hand a dual vac small carpet / upholstery cleaning machine, ideally something like an alltec aqua 30 or sahara, i need something that can be put in the back of an estate car but can handle doing large jobs, also needed is a dual spray wand and stair + upholstery tool and other bits & pieces i.e matts / sprayer / dryer but No Chemicals.
-
Hi where abouts are you, i have a cfr pro 500 perfect heat, bigger than a alltec.
but has wheels on handle to make loading easy, also have a small host machine for agitation.
machine comes with 33' and 25 ' extension and a roller wand.
Also have a vac booster for long hose runs,
Andrew
-
Hi i'm in southampton, hampshire
The machine is a little bigger than i would have liked but i am interested, how much would you like for it? also how old is it? where is the outlet pipe? sorry haven't used this one before and cant seem to find answers online,
thanks for getting in touch
-
machine is quite large, but loads easily, machine is 2 year old, only 670 hours,
outlet pipe is from middle of rear of machine and a flexi pipe comes up rear right, see pic , by power cables.
Machine is fully adjustable up to 500psi and the roller wand is one of the best on the market, leaves carpets much drier.
A heater is built in, and you can also pre heat the water using the perfect heat system, which coils around the vac motors and draws heat from them, before going thru heater.
All water recirculates, and goes thru 4 filters, enabling you to use the water upto 7 times, on large jobs this has saved me 10-15 mins every hour.
Phone me for a price on 07850 805251 or email andrewbriscoe@fsmail.net
machine new is £2350 hoses £265 and £155, wand is £450
booster vac if you want is about £550 new all plus vat
Open to a sensible offer, for sale due to upgrade ,
Andrew
-
I have a small alltec possibly for sale.
Drop me line 07938 696634
info@mjcontracts.co.uk
Michael
-
I used to have a CFR500 like for sale in a previous post.
Fitted in the back of a Fiat Marea Weekend (estate) very easy, and easy to get it in/out.
You do need a flat load area for any type of machine or you will struggle.
-
My Steempro set up for sale on the same section will fit into an estate either upright or on its side (I know because I had a colleague who used one like this).
My machine is under warranty and is as good as new.
You also get everything else you need including two vacuums.
With 75 ft of hose you sit the machine at the front door and can do a 3-storey town house with one fill. I have also been able to do offices etc.
With the ability to sit at the entrance and a silencer, there is minimal disruption to business premises.
Its a bargain at £1500. Had lots of interest but no cash as yet.
-
Hi where abouts are you, i have a cfr pro 500 perfect heat, bigger than a alltec.
but has wheels on handle to make loading easy, also have a small host machine for agitation.
machine comes with 33' and 25 ' extension and a roller wand.
Also have a vac booster for long hose runs,
Andrew
Booster now sold to a nice man from chorley :D
-
hi
thanks for all of your kind offers, just bought a sahara to get me through till i get a van
many thanks
-
Andrew
I would be interested in a price on the CFR
If you want to mail me r-mclean@btconnect.com
Many thanks
Rob ;D
-
Rob,
just seen your msg, have to pop straight out again, will get a price to you later, cheers,
Andrew
-
Andrew
I would be interested in a price on the CFR
If you want to mail me r-mclean@btconnect.com
Many thanks
Rob ;D
email sent Rob
Andrew