Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: MICHAEL_GAYTON on June 27, 2008, 08:50:22 pm

Title: spitfire wiring help
Post by: MICHAEL_GAYTON on June 27, 2008, 08:50:22 pm

just finishing rebulding my spitfire but got a white wire not sure were it goes i have all the white earth wires going to the engine but this one comes from one of them. ???

Title: Re: spitfire wiring help
Post by: Len Gribble on June 27, 2008, 09:43:44 pm

Where are the yellow ones going, white is normally earth?

Len

Title: Re: spitfire wiring help
Post by: MICHAEL_GAYTON on June 27, 2008, 10:34:58 pm

hi  Len the two yellow go to box on the side of engine ,its the spare white is doing the head in,

Title: Re: spitfire wiring help
Post by: Shaun_Ashmore on June 27, 2008, 10:41:52 pm

2 yellows go to the regulator, Dave Annable has a Spitfire he's from Stockport www.supaclean.supanet.com/index.htm

Shaun

Title: Re: spitfire wiring help
Post by: john rees on June 27, 2008, 10:57:45 pm

on a kohler engine there is an earth wire that you fix under the  regulator housing when you bolt it back on? could be the same for yours too?

               All the best
                                John

Title: Re: spitfire wiring help
Post by: Gerry Styles on June 27, 2008, 11:48:29 pm

why not call Hydramaster and speak to Martin. He is very helpful

Title: Re: spitfire wiring help
Post by: MICHAEL_GAYTON on June 28, 2008, 06:44:02 am

will call martin on monday thanks.

Title: Re: spitfire wiring help
Post by: nevil on June 28, 2008, 06:49:52 pm

Pretty sure its earth.

Title: Re: spitfire wiring help
Post by: nevil on June 28, 2008, 06:52:43 pm

forgot to say snap, well nearly. It's a spitfire 4.0 also.

I have at times been intimate with the wiring. ;D