Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: birdymiller on May 30, 2008, 05:09:48 pm
-
Cracking on with my trolley then for some reason water stopped coming out of my brush. Is it dead. Pump seems to be making a noise, anybody got any ideas ???
-
do you have a variable flow controller on it?
-
Yes some dial that has 1 to max on it. Also got a tap on the end of my pole that turns water off
-
Have you run out of water? My Omnitrolley used to be a b***h to get to prime again if I let it run dry.
-
No, it was working fine and then all of a sudden water stopped
-
hi birdy gotta go home now so cant keep posting will be on the forum in the morning if that helps or your more than welcome to ring me on my mobile. 07881780987
cheers james
-
I had a small stone stuck in the 3-way pipe fitting near the brush yesterday. That affected the water supply.
Could be an airlock, try turning the pump off, fill the inlet hose full with water then turn the pump back on.
Matt
-
inlet hose, ???which one would that be
-
The one water goes into from your barrel
-
my trolley was stupid to if ever i ran out, i used to get the outlet hose and suck it till the water came through, hopefully sort it, try that and tell us what happens. if you have water coming out of the out let before the hose then its summi else
-
All sorted. I had to take the hose connector of the hose that comes from the pump and lower it so if was lower than the pump and wait until the water was coming through. My neighbour sorted it. thanks for the replys :)
-
All sorted. I had to take the hose connector of the hose that comes from the pump and lower it so if was lower than the pump and wait until the water was coming through. My neighbour sorted it. thanks for the replys :)
no problem thats £5 please oh + VAT