Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: birdymiller on May 28, 2008, 04:34:42 pm
-
On your harris pole you have your hose inside the pole. How did you do this. Is it tricky ???
-
On your harris pole you have your hose inside the pole. How did you do this. Is it tricky ???
drill a hole in one part not straight through and push the hose down.
-
cheers, so what else will i need because i have an unger pole but the hose is on outside and is pretty worn out. Can i use cone and angle adaptor of it.
-
I've been converted and also bought a harris pole. I drilled a hole and used coarse emery paper to file out the hole, so it didn't slice the pvc tubing.
At the bottom, I drilled straight up and kept swiveling the drill to make a larger hole, so the hose can slip through easily without snagging.
I also fitted some fan jets today. I fitted them next to the pencil jets so that I can choose either as and when!
-
cheers, so what else will i need because i have an unger pole but the hose is on outside and is pretty worn out. Can i use cone and angle adaptor of it.
I just screwed the angle adapter straight onto the cone that comes with the pole. I forced it so that it cut a thread onto the cone. A really tight fit, and I can unscrew it if necessary. 8)
-
cheers, dont think im ready for discussing jets yet ???.
-
cheers, so what else will i need because i have an unger pole but the hose is on outside and is pretty worn out. Can i use cone and angle adaptor of it.
Need hose if it is worn out, you can use the cone and angle adaptor.