Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: bigw66 on May 22, 2008, 11:38:05 pm

Title: di only half full with water
Post by: bigw66 on May 22, 2008, 11:38:05 pm

Hello just a quick question i have a pure freedom 200gpd ro i have just installed a booster pump and have noticed that the di which came with the ro (clear plastic one) is only half full with water where before installing the pump it was full, just wondered if this matters.

Thank's
bigw66

Title: Re: di only half full with water
Post by: alanwilson on May 22, 2008, 11:42:29 pm

no it doesnt matter.

Title: Re: di only half full with water
Post by: DASERVICES on May 22, 2008, 11:45:48 pm

Agree with Alan, but if your resin is escaping out of your di vessel you have a problem as you will be left with no resin.

Best speak to Pure Freedom about it, probably the pressure in is too great.

Title: Re: di only half full with water
Post by: alanwilson on May 22, 2008, 11:47:45 pm

I think what he means is that there is air trapped in the vessel between the sides of the vessel and the di cartridge  -this happens quite a lot and works its way out over time.

Title: Re: di only half full with water
Post by: michael papworth on May 23, 2008, 01:00:52 pm

Confucius wants to know if the DI vessel is half full or half empty?

Title: Re: di only half full with water
Post by: pjulk on May 23, 2008, 04:03:04 pm

This happens to mine all the time

Title: Re: di only half full with water
Post by: dmlservices on May 23, 2008, 08:17:01 pm

hi just slacken off cylinder , bleed out air , re tighten , problem sorted ;D