Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: m.b.s. on May 02, 2008, 09:16:04 pm
-
how do yo seperate the brush from the brush head the head has a 9 inch gooseneck followed by a bar on the brush its self ???
-
Pop the hose off of the jets and then I believe that you unscrew the jets from the bristle side.
-
m.b.s.
why
jerry
-
m.b.s.
why
jerry
because i want to give the brush a good clean
why you ask ?
-
the brush head and gooseneck is one complete unit that fits in the top of the pole, you should have a very small alan key to release it from the pole
easiest thing to do is get a bucket of pure water and stand your pole upside down in it
Brett
-
the brush head and gooseneck is one complete unit that fits in the top of the pole, you should have a very small alan key to release it from the pole
easiest thing to do is get a bucket of pure water and stand your pole upside down in it
Brett
thanks i have disconected it from pole but wanted to get all the grime from under the brush head how do i get it off
-
the brush head and gooseneck is one complete unit that fits in the top of the pole, you should have a very small alan key to release it from the pole
easiest thing to do is get a bucket of pure water and stand your pole upside down in it
Brett
thanks i have disconected it from pole but wanted to get all the grime from under the brush head how do i get it off
i wouldnt try and force it apart as i think the jets are fitted holding the black part on to the brush head
regards
Brett
-
so as alex said