Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Mike 108 on May 02, 2008, 04:49:15 pm
-
I'm doing some problem windows tomorrow (WFP).
My plan was to spray/brush the glass with a dilution of TFR and leave it for 20 minutes before going back to clean using WFP.
A colleague has told me that he has seen advice given on the forum NOT to let TFR dry on the glass - as it is very hard to get off, once dry.
Anybody else heard this or have any experience of such?
Will read later.
Thanks
Mike
-
Depends on the dilution rate, but yes you can get white stains if left too long. 5 min max.
Try a pre scrub with gg3 or 4 first.
-
Thanks for that info, Jeff.
Mike