Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: The Seven Bays Window Cleaning Company on April 26, 2008, 07:16:30 am

Title: 100 or 60 psi Pump
Post by: The Seven Bays Window Cleaning Company on April 26, 2008, 07:16:30 am
I'm in the process of setting up a static system in my van.

But not sure what pump to get.

I work on my own, with soon to be 100mtrs of 6mm Microbore. No flow control, except from the my valve at the pole

Sooooz, do I need 100 or 60 psi pump.

Any brand preference?

Thanks
Title: Re: 100 or 60 psi Pump
Post by: russ_clark on April 26, 2008, 07:50:52 am
100psi shureflo for me -same set up
Title: Re: 100 or 60 psi Pump
Post by: The Seven Bays Window Cleaning Company on April 26, 2008, 08:19:00 am
Is there a noticeable difference two between the pressure ratings - in terms of water usage?

My trolley pump is 60psi, running it as a static set up at the moment in the van with 60 mtrs of 6mm hose.

The water flow and pressure is about right.

What difference will I notice with 100 psi?

Thanks for the help
Title: Re: 100 or 60 psi Pump
Post by: Alex Gardiner on April 26, 2008, 08:59:36 am
The 100psi Flojet pump will easily give you enough flow rate for a 100m reel of microbore.

A simple way to test if the 60 psi pump would suffice is to buy your 100m of microbore first and try it out on the trolley. If you are happy with the flow rate then you can stick with a 60psi.
Title: Re: 100 or 60 psi Pump
Post by: Highrise on April 26, 2008, 09:18:08 am
why not use two 50mtr hose with connectors so as and when you need the length you got it...

You will lose some pressure on the 100 mtr hose and you will prolong the life of you pump.
Title: Re: 100 or 60 psi Pump
Post by: The Seven Bays Window Cleaning Company on April 26, 2008, 09:46:16 am
The 100psi Flojet pump will easily give you enough flow rate for a 100m reel of microbore.

A simple way to test if the 60 psi pump would suffice is to buy your 100m of microbore first and try it out on the trolley. If you are happy with the flow rate then you can stick with a 60psi.

Alex, is there any difference between the Flojet's and Shrurflo's Pumps - in terms of flow, reliability, and durability?

I notice that Pure Freedom are selling a Shurflo 100 psi Pump for £80 including postage.   
Title: Re: 100 or 60 psi Pump
Post by: Paul Coleman on April 26, 2008, 09:56:20 am
The 100psi Flojet pump will easily give you enough flow rate for a 100m reel of microbore.

A simple way to test if the 60 psi pump would suffice is to buy your 100m of microbore first and try it out on the trolley. If you are happy with the flow rate then you can stick with a 60psi.

Alex, is there any difference between the Flojet's and Shrurflo's Pumps - in terms of flow, reliability, and durability?

I notice that Pure Freedom are selling a Shurflo 100 psi Pump for £80 including postage.   

I know I'm not Alex but I understand that Shurflow do not guarantee their pumps if used with smaller bore hose but Flojet do.  That may speak for itself but it doesn't necessarily mean the Flojet make better pumps.  It may just mean they are slower on the uptake.
Title: Re: 100 or 60 psi Pump
Post by: Alex Gardiner on April 26, 2008, 11:50:49 am
Either the Shurflo or the Flojet 100psi will do the job. I have always had good reliability from the Flojets though. On average I have had about 3 years out of each pump, (used about 8 of them in our various vehicles, trailers etc). I have also had to replace one pressure switch after about 1 years use on one of the pumps.
Title: Re: 100 or 60 psi Pump
Post by: groundhog on April 26, 2008, 11:52:24 am
I've been using a flojet pump for 2 and a half years with no problems until yesterday when it finally died! :(  Luckily I had an old backpack pump which I am using for the time being. I'm not sure if 2.5 years is about the lifespan of a pump? but I suppose its not bad as it got used virtually everyday for a good 8hrs a day!!

Now I need to replace it, but am unsure whether to go for the shurflo which seems to be a bit cheaper or another flojet ???
Title: Re: 100 or 60 psi Pump
Post by: david-maunder on April 26, 2008, 01:31:24 pm
I've been using a flojet pump for 2 and a half years with no problems until yesterday when it finally died! :(  Luckily I had an old backpack pump which I am using for the time being. I'm not sure if 2.5 years is about the lifespan of a pump? but I suppose its not bad as it got used virtually everyday for a good 8hrs a day!!

Now I need to replace it, but am unsure whether to go for the shurflo which seems to be a bit cheaper or another flojet ???
snap just what happened to me yesterday.
water leaking every were, had the boy at the van with me shouting ON,OFF going like the clappers to get job done....ordered the same pump for £101 + vat 95 psi flowjet..not bad bought it 2nd hand 4 years ago..
Title: Re: 100 or 60 psi Pump
Post by: groundhog on April 26, 2008, 04:50:48 pm
I've been using a flojet pump for 2 and a half years with no problems until yesterday when it finally died! :(  Luckily I had an old backpack pump which I am using for the time being. I'm not sure if 2.5 years is about the lifespan of a pump? but I suppose its not bad as it got used virtually everyday for a good 8hrs a day!!

Now I need to replace it, but am unsure whether to go for the shurflo which seems to be a bit cheaper or another flojet ???

Just took the old pump to bits, and replaced a couple of dodgy looking wires, and bingo its going again!!!!!!!!!!!! ;D ;D I'm well chuffed, perhaps I'll get another 6months or even a year out of it yet!!! ;D