Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: allyoops on April 14, 2008, 01:50:57 pm

Title: block paving sealant
Post by: allyoops on April 14, 2008, 01:50:57 pm

Can anyone recommend a particular sealant and supplier ,as i am getting several requests for this service.I would prefer a one coat application and would prefer to spray rather than roller any suggestions gratefully recieved,cheers Neil

Title: Re: block paving sealant
Post by: drivewasher on April 14, 2008, 06:13:55 pm

These folk know whats wat and it's really good stuff,
Have a rot around this link

http://cgi.ebay.co.uk/Block-Paving-pattern-imprint-Concrete-Sealer_W0QQitemZ250234385037QQihZ015QQcategoryZ20594QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Title: Re: block paving sealant
Post by: drive surgeon on April 14, 2008, 06:15:16 pm

im trying to advise my customers against it as its really expensive and it still is not as good as its made out to be.  its a pain in the arse really.

Title: Re: block paving sealant
Post by: mark.laycock1@ntlw on April 14, 2008, 08:00:17 pm

hi,allyoops,
could you email your details please.mark

Title: Re: block paving sealant
Post by: allyoops on April 14, 2008, 08:02:39 pm

Thanks for the input guys,I can understand the reluctance to do it,but once they have seen the "shiney"
surface thats what they want and if I dont do it someone else will,so I may as well take the profit.
Would be interested to have some idea of the timescale for application,cheers Neil

Title: Re: block paving sealant
Post by: steve doyle on April 14, 2008, 09:36:48 pm

Try marshalls keybond,

Its technically a joint stabalizer but its easy to apply with a watering can and although not shiny its visable and you can do 2 coats if you want. its water based so no need to worry about dampness  getting trapped and turning cloudy. its also alot cheaper than sealent although its not cheap stuff c.£35 (5litre).

Its the only thing i use now.

steve

Title: Re: block paving sealant
Post by: dandandan on April 16, 2008, 08:07:15 pm

How long do you get with a bottle ste?Do you have to apply it on a dry surface?Can you offer it as an extra and put price up to cover cost,does customer notice it`s been applied,how long does it take to dry and when its dry do you just brush over it or is that it,sorry about all the questions but i`m interested in this stuff,i reckon that sealer goes grey and dull after a bit and looks greasy.this stuff must stop the sand blowing out the joints does it mate,were do you get it,wicks? thanks

Title: Re: block paving sealant
Post by: steve doyle on April 17, 2008, 07:19:02 pm

hi mate,

drop me a line with your number aquapowerclean@sky.com

steve

Title: Re: block paving sealant
Post by: James Johnson on April 18, 2008, 11:20:05 am

We have a good one, where are you as delivery can be an issue @ 15kgs per drum.?e-mither

enco@37.com

Title: Re: block paving sealant
Post by: allyoops on April 18, 2008, 03:31:05 pm

Based in Swansea,would appreciate some more info,cheers Neil