Clean It Up

Market Place => Used Equipment For Sale/Wanted => Topic started by: mark_roberts on April 08, 2008, 11:21:48 pm

Title: Hardfloor Spinner Tool ----- Wanted
Post by: mark_roberts on April 08, 2008, 11:21:48 pm

Wanted

Hardfloor spinner tool for Truckmount use.

Mark

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: murky on April 09, 2008, 07:39:41 pm

If you hear of one I am looking as well.

Murky

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: des on April 10, 2008, 04:20:09 pm

Ive being looking to but i do not think they come up second hand very often .Why not get new one,s and ask for a discount for buying two

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: mark_roberts on April 10, 2008, 10:00:07 pm

Are you two in for buying one then.  I prefer the turbo from Woodbridge.

Mark

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: gwrightson on April 11, 2008, 06:46:44 pm

I ,m interested in one :)

maybe a bit of bulk buying might do the trick

geoff

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: murky on April 12, 2008, 10:57:02 am

Me too as previously posted.

I tried to look on the Woodbridge site as Mark suggested but couldnt see it.

I agree, could we get together and buy a few.

Murky.

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: des on April 13, 2008, 07:17:19 pm

WOODBRIDGE www.wcsuk.com but i could not find Hardfloor spinner tool Des

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: John Kelly on April 14, 2008, 07:37:31 pm

These are the best. Just contact them and they will probably ship them.
http://www.turbo-force.com/index-1.html

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: Shaun_Ashmore on April 14, 2008, 08:27:51 pm

I know a few cleaners who have got these and as John says these are probably the best, I think they are what most of the US cleaners use.

Shaun

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: Mike Roper on April 15, 2008, 05:42:36 pm

Can you use one with a speedster ie 450psi.I suppose you would be stop starting all the time filling/emptying.
Mike

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: John Kelly on April 15, 2008, 06:07:24 pm

I have used it with a 400psi portable for removing silt after a flood. Coped ok but wouldn't really have the grunt to actually clean ingrained dirt from a surface. You could run it off a cheap pressure washer and use the porty for suction.

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: Buster Ingram on April 15, 2008, 11:28:11 pm

I'll second that John, the Turbo Force out performs any other I have had.
They are more managable than the large spinners specially on Truck Mounts where there is more suction and they clean far better too. When I closed my business in Wolverhampton last year to start up here in Berkshire I sold mine to Dave Washbrooke in Barmouth. looking back I wished I'd of held on to it. :'(

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: murky on April 16, 2008, 03:40:42 pm

Restoremate do a spinner for £315.00 plus VAT.

I spoke to Woodbridge the other day and he now recommends a 'Gekko type ' 4 jet wand with brush over their spinner now.

Their spinner is about £560 and the wand £250 all plus VAT.

Cant make my mind up, anyone tried the Restoremate spinner, £315 seems like good value to me.

Murky

Title: Re: Hardfloor Spinner Tool ----- Wanted
Post by: gwrightson on April 16, 2008, 06:16:59 pm

well John is recommedning the one above  :-\

geoff