Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Michael D on April 08, 2008, 08:39:15 pm
-
Hi ALL
I live in a soft water area, since i invested in merlin i have saved a lot of money on resin. I have now been on the same vessil of resin for the last 13 momths and the water is still pure, all i have changed is the pre filter £20 thats all i`ve spent since i `ve got merlin. Anyone else doing this. I give merlin 10 out off 10
Michael D
-
I hope ur not on a water meter ;D Have u seen the waste on those things??
In a hard water area I give it 1/2 outta 10 :o
-
Merlins are great in high pressure/low TDS areas - anything where else they can be next to useless!
-
Merlins are great in high pressure/low TDS areas - anything where else they can be next to useless!
Mine delivers about 40 - 45 litres per hour of pure water and the pressure is just under the recommended 40 PSI. Not massive production but fine for a one man operation. Seems to be quite a bit of waste though but it's not metered.
-
Get a second tank to collect the waste water and then use a booster pump to "recycle" it through the Merlin until the waste TDS starts to get about 300 - 400. Saves on resin and saves water. 650L per day of pure used with less than 40L of waste.
Regards
Mr H