Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: frames to panes on April 01, 2008, 05:22:51 pm

Title: Alex's Brush
Post by: frames to panes on April 01, 2008, 05:22:51 pm

Alex, any pics yet? I have been re-jetting my brushes to a wider position, just wondering how far apart the jets will be on the new one.

Title: Re: Alex's Brush
Post by: Alex Gardiner on April 01, 2008, 09:17:54 pm

The jets are positioned at exactly 1/4 position and 3/4 position on the width of the brush.  The brush is 260 mm wide, therefore the jet holes are 65 mm in from either side, with 130 mm between them.  This distance should give a perfectly even coverage of water over the entire width of the brush from just two jets.

No pics yet I'm afraid.

Title: Re: Alex's Brush
Post by: geefree on April 01, 2008, 09:56:05 pm

Hi Alex

whats holding the new brush up, as was due out in march , now april, no pictures even yet..

just curious. ;)

Cheers.

Gary.

Title: Re: Alex's Brush
Post by: Alex Gardiner on April 01, 2008, 10:02:35 pm

Hi Gary

Originally we were having this made in China. This proved to be such a time consuming option that after six wasted months we switched to an English factory with a slightly different design (for manufacturing simplicity). This new firm originally promised us that the batch would be ready by the end of March but due to their work load, have been unable to fulfill that.  Hence, we are now looking at an April delivery date.  Oh, if only life were simple.  :)

Title: Re: Alex's Brush
Post by: Moderator David@stives on April 01, 2008, 10:12:47 pm

What do you expect in Cornwall.

It will be here "Dreckley"  ;D

 for those that dont know that is manyana in Spain

Title: Re: Alex's Brush
Post by: Alex Gardiner on April 02, 2008, 08:30:02 am

Quote from: Dave morris @ st-ives on April 01, 2008, 10:12:47 pm

What do you expect in Cornwall.

It will be here "Dreckley"  ;D

 for those that dont know that is manyana in Spain

 :)