Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: andrew.ralph@homec on March 21, 2008, 01:02:08 pm

Title: pumps
Post by: andrew.ralph@homec on March 21, 2008, 01:02:08 pm

hi all what would be the minimum psi on pump 2 run to poles cheers andy

Title: Re: pumps
Post by: Alex Gardiner on March 21, 2008, 01:23:20 pm

80-100psi. You would also need a pump with a decent flow rate something like a Flojet 100psi would do the trick, no electronic flow controller needed.

Title: Re: pumps
Post by: andrew.ralph@homec on March 21, 2008, 01:34:07 pm

thanks alex do u sell these and how much cheers andy

Title: Re: pumps
Post by: Alex Gardiner on March 21, 2008, 02:06:13 pm

No we do not sell them, but Wintecs does here is the link for the pump:

http://www.wintecs.co.uk/catalog/product_info.php?cPath=58_79&products_id=405

When you  set it up, use this link and follow the instructions to '[match' the pump to your exact set-up needs:

http://www.gardinerpolesystems.co.uk/acatalog/What_pressure_delivery_pump_will_I_need_.html

I hope that this helps.

Title: Re: pumps
Post by: andrew.ralph@homec on March 21, 2008, 03:16:05 pm

thanks alex for that info should i use microbore instead of mimibore thanks for help andy

Title: Re: pumps
Post by: Alex Gardiner on March 21, 2008, 04:51:17 pm

I would recommend microbore with the above set-up.