Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: NWH on March 04, 2008, 05:44:16 pm
-
I was thinking it would be good if we had a thread where we could all give are input into fault finding with a WFP system ie we give the fault that we`ve had and then give the answer to finding the fault.I`ll start it off with 1,connected hose from tank to hosereel but once connected pump keeps turning on and off with no water to pole,answer = varistream set on to high a setting therefore to much pressure to hosereel making pump turn on and off,turn down to a lower setting problem solved.
-
airlock maybe?
i removed my vairstream, nothing but problems
just put a on/off switch in place, no problems anymore :)
-
No i didn`t mean answer my problem i meant give an account of your problems you`ve had in the past and how you solved them,it gives people some sort of list that we can all go to for future problems that may crop up.If i have a problem that you may have had i can then go to this thread and the cause of the fault will help me then to rectify mine.
-
I'm small, fat, ugly, bald as a coot & my manhood resembles a walnut whip! :'(
What should i do?
-
move up the valleys .plenty girls for us kind
-
I'm small, fat, ugly, bald as a coot & my manhood resembles a walnut whip! :'(
What should i do?
Get a Facelift lol. ;D ;D ;D ;D ;D ;D ;D ;D. What you doing on here at this time it`s not chucking out time yet is it.
-
More like problems per window, sash, old leaded, gothic type. What to look for, do's and don'ts
-
I'm small, fat, ugly, bald as a coot & my manhood resembles a walnut whip! :'(
What should i do?
Get a Facelift lol. ;D ;D ;D ;D ;D ;D ;D ;D. What you doing on here at this time it`s not chucking out time yet is it.
;D ;D ;D
Just a quick sneak on while she's bathing the baby. ;)
Tony
-
I thought i`d start this thread because it would be a bit more informative than knowing what someone ate for there lunch. ::) ::) ::) ::)
-
I thought i`d start this thread because it would be a bit more informative than knowing what someone ate for there lunch. ::) ::) ::) ::)
Hey dude, my post is serious! :-[
Tony
-
No i didn`t mean answer my problem i meant give an account of your problems you`ve had in the past and how you solved them,it gives people some sort of list that we can all go to for future problems that may crop up.If i have a problem that you may have had i can then go to this thread and the cause of the fault will help me then to rectify mine.
my problem is I'm stupid and missread it ;)
-
my flow rate was reduced considerably for a few weeks resulting in me having to turn the flow rate right up. I eventually sussed there was some debris blocking the hose at the Y piece.
-
How do stop your microbore twisting up ?
-
I'm small, fat, ugly, bald as a coot & my manhood resembles a walnut whip! :'(
What should i do?
Wheres Groundhog when u need him.. now what would he say? oh yes GET A VAN MOUNT!!
-
I'm small, fat, ugly, bald as a coot & my manhood resembles a walnut whip! :'(
What should i do?
I've got one, & a facelift carbon, & a digital varistream, what else do i need?
Tony
Wheres Groundhog when u need him.. now what would he say? oh yes GET A VAN MOUNT!!
-
How do stop your microbore twisting up ?
??????????????
-
How do stop your microbore twisting up ?
If it`s twisting up the chances are it was put on the reel the wrong way round.
-
It happened to me and i turned it round and problem solved.
-
It happened to me and i turned it round and problem solved.
has only just started happening, and it is getting right on my ******
what people most thick with me waiving hands in the air kicking the ground ect I dont know.
Ian
-
It is happening because it`s twisted,take a good look at it and in places you will see.
-
It is happening because it`s twisted,take a good look at it and in places you will see.
I know it is twisted, how can I stop it.
that sounds blunt sry but you should no me by now ;)
Ian
-
Off topic but nice to see you back WW, it's seemed strangely quiet while you were sunning it up! ;)
Tony
-
You need to reel it right out in a line and see where it`s twisted,straighten it out and reel it back in making sure it dosen`t kink again going back on the reel,once you`ve done this it should stop it.If when you reel it in your getting loops facing upwards it needs to come off and turning round,i was getting the loops pointing upwards and taking it off and turning it round cured the problem.
-
It will twist & twist again, it's not the miracle hose some would have you believe. i changed to minibore & it twists more than my old anti-kink 1/2" hoselok!
Tony