Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Andrew44 on February 16, 2008, 10:35:31 pm

Title: Connecting RO to DI
Post by: Andrew44 on February 16, 2008, 10:35:31 pm

Got a staic system in shed and have connected the RO up but will need a DI which is on order.  I have got JG 3/3 pipeing and the recommendation in the instruction sheet is to use this to connect to DI (if required).  I can do this but presume this will not connect up to the DI canister as I'm getting DI with 3/4 inch inlet and out let.

Should just use standard hose from RO to DI and change the connection on the outlet on RO from JG to hozlock or can/ should I buy connection to connect JG 3/8 pipe to 3/4 inch Hozlock on DI.


Finaly what to most people have as hose to tank or DI?  Is it 3/8 pipe or standard hose.

Sorry for all questions  ;D
ta

Title: Re: Connecting RO to DI
Post by: NWH on February 16, 2008, 10:41:31 pm

Explain to gardiners what you have and i`m sure they will send you all the plumming you need,your talking a few quid.

Title: Re: Connecting RO to DI
Post by: craig21t on February 16, 2008, 11:00:20 pm

what ro are you using? if its the merlin then the clear pipe will fit inside 1/2 inch hose, a couple of hose clips on the outside and job done. if its  an ro-man type theres a john guest fitting available giving you the ro fitting speedfit to 3/4 internal female.

Title: Re: Connecting RO to DI
Post by: Andrew44 on February 16, 2008, 11:30:56 pm

Craig

It's a 4x 40 but only with 3/8 inch JG pipe.

Title: Re: Connecting RO to DI
Post by: dave0123 on February 16, 2008, 11:35:21 pm

im using a trolley and from my ro do 11lit di vessel i use the RO tubing 6mm to normal size hose with a correct connector.

you carnt see it properly but u can get an idea from ths picture of my setup