Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: m.b.s. on February 16, 2008, 03:05:04 pm

Title: alex
Post by: m.b.s. on February 16, 2008, 03:05:04 pm

dose your vikan 28cm mono rectan  brush come with the tube that connects from the jets to the y section i think its the 4mm pipe not the pole hose pipe

Title: Re: alex
Post by: Alex Gardiner on February 16, 2008, 05:01:39 pm

Yes they do.
(http://www.gardinerpolesystems.co.uk/acatalog/Brush_Vikan_mono_rect.jpg)

All that is shown in this picture, comes with the jetted mono-filament brush.

Here's the link:

http://www.gardinerpolesystems.co.uk/acatalog/Brushes.html

Title: Re: alex
Post by: m.b.s. on February 16, 2008, 06:13:12 pm

alex are these any good for domestic if so do you have it in sock and if order today when will i recive it as need a brush urgent if not what do you recomend for domestic and a bit of commercial

Title: Re: alex
Post by: Alex Gardiner on February 16, 2008, 06:22:43 pm

They are fine for domestic and commercial (albeit a little heavy for my taste!). They are in stock, order one now it will go out first class post on Monday.

Title: Re: alex
Post by: m.b.s. on February 16, 2008, 07:10:20 pm

have just orderd it will you check and see if you got  it thanks

Title: Re: alex
Post by: Alex Gardiner on February 16, 2008, 07:14:47 pm

Yes, the system has sent me a copy of the order. That will go out First Class on Monday morning.  I don't actually have anything to do with the main networked computer ordering system as that's located in the office.  I have set it up though so that a duplicate gets sent to my computer, which can be very useful for times like this!

Title: Re: alex
Post by: [GQC] Tim on February 16, 2008, 09:00:09 pm

Alex, do you do some parts that I can use on my Ionics multipole brush? It comes without any tubes. The Barbs on the jets are for 6mm ID Hose, but I can't find a Y-connector anywhere that has 6mm in and out. Do you have one of them?

Kind regards,

Title: Re: alex
Post by: Alex Gardiner on February 16, 2008, 09:06:02 pm

Yes, we've got some 6 mm to 6 mm Y pieces.  If you wait a couple of minutes, I'll pop them on the website.  :)

Title: Re: alex
Post by: Alex Gardiner on February 16, 2008, 09:15:56 pm

Here it is!

(http://www.gardinerpolesystems.co.uk/acatalog/6mm_y_connector.jpg)

Here is the link

http://www.gardinerpolesystems.co.uk/acatalog/Inline_hose_Menders__adapters__Connectors.html

5th item down.  :)

Title: Re: alex
Post by: [GQC] Tim on February 18, 2008, 09:33:41 pm

Fantastic mate, thank you so much, I'm gonna order some bits!  :)