Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: *john garnett on February 13, 2008, 04:58:00 pm
-
I HAVE A 40x40 FROM CLEANTECH AND THE TDS FROM THE RO IS READING 36 - IS THIS NORMAL? THE TDS AFTER THE DI IS SHOWING 3. WHAT DO YOU THINK? SHOULD I CHANGE THE RESIN OR THE RO MEMRANE? THANKS FOR UR HELP.
-
I HAVE A 40x40 FROM CLEANTECH AND THE TDS FROM THE RO IS READING 36 - IS THIS NORMAL? THE TDS AFTER THE DI IS SHOWING 3. WHAT DO YOU THINK? SHOULD I CHANGE THE RESIN OR THE RO MEMRANE? THANKS FOR UR HELP.
is it new ? if it is it needs washing through, same happened on my 4040, do you flush it ? mine 4040 is reading 17/22 was at 36
-
Can't answer your question - but are you the John Garnett from Fleetwood?
Mike
-
having a softener reduced my twin 4040 ro out from 040 to 016 depending on hard or soft water area, but yeh your resin beads are on there way out, i change mine when they read 007 -010 max
-
having a softener reduced my twin 4040 ro out from 040 to 016 depending on hard or soft water area, but yeh your resin beads are on there way out, i change mine when they read 007 -010 max
007 010 :o I used to change mine at 001 because pure water is 000.
Stve do you have twin di's ?
I did thins and still going on the same resin ages down the line where before it was every couple of weeks
Ian
-
J.Garnett/ windowwashers ian
run twin softening resin re charge whith b &q salt will bring your tds down to 6/10
jerry
-
J.Garnett/ windowwashers ian
run twin softening resin re charge whith b &q salt will bring your tds down to 6/10
jerry
I know dude, just need to do what you said, have the stuff just not the space till I sell house ;)
-
no prob ian,
will ring u later
jerry (fosters)
-
no prob ian,
will ring u later
jerry (fosters)
Ok m8, in all evening ;)
Ian (fosters)
-
my tds is 022 - straight from the tap! :)
-
dan hughes
do u live in heaven
jerry
-
Can't answer your question - but are you the John Garnett from Fleetwood?
Mike
Who?
No.