Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Rayleigh Window Cleaning Services on February 08, 2008, 11:04:39 pm
-
I just recently got one with a 100psi shurflo pump from cleantech, unfortunatley Ireceived no info withit.
I have fitted it in with no problems, but when I tested the lpm with pole it produced one and three quarter litres this was with the flow rate when on number 9 the highest level.
Is this about right or should it produce more?
Hose is 100m microbore with fully charged battery.
-
I've just got the same but a ready made box, tried it today & have to have it set at 1 otherwise i've too much flo! 80m minibore/2mm pencil jets.
Tony
-
Tony
Thanks for the reply. What by having it on 1 are you getting per minute? I just want to know if what i am getting is the norm.
-
I couldn't tell you mate i havent measured it.
What i can say is i'm not one for a low flow rate or into saving water & number 1 was ample, infact it was a bit more than i normally use.
I used it for the first time today on one big house, took me an hour none stop & the flow was constant throughout.
Tony
-
yeh i reaon 1 is too much on them. gonna blast through my water when i get my hose reel sorted ::)
-
yeh i reaon 1 is too much on them. gonna blast through my water when i get my hose reel sorted ::)
Maybe it`s because your used to the flow rate on the backpack.