Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: derikraven on January 18, 2008, 07:25:05 am

Title: Ninja advice
Post by: derikraven on January 18, 2008, 07:25:05 am

I've just bought a second hand Ninja. Is there a procedure for turning on and turning off the vacs i e which vac do you turn on first and which do you shut down first

Title: Re: Ninja advice
Post by: carpet guy on January 18, 2008, 09:10:22 am

Bottom switch on first............off last If you find fuses blowing or tripping, accompanied by burning smell, the brushes need replacing.

It's common on Ninja after a couple of years use

If one motor goes, you can still work with the remaining one, obviously at half power, but you can finish the job.

Replacing brushes is relatively easy and an awful lot less than replacng motors

Title: Re: Ninja advice
Post by: Dennis on January 18, 2008, 09:38:34 am

I´ve sent you a copy of the manual to the e-mail address in your profile just in case you don´t have one.