Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: JSMC on January 11, 2008, 06:11:29 pm
-
what is most commonly used ID hose by all of you guys?
-
I use 70metres of 6mm (microbore) on both my reels, can have the flow rate as high as I like and its nicer to use than the 8mm.
-
4mm soft and flexible, lightweight silicon hose for me.
-
Statistically more of our customers buy 6mm. This may be due to the fact though that this is what we promote as we find that it works best.
-
I use Gardiner's microbore that Alex came up with, it's the bizz.
-
I use the 8mm id minibore works well for me but its the only hose i have used
Dean
-
I use the 8mm id minibore works well for me but its the only hose i have used
Dean
Same here
Bazzy...
-
6mm Microbore here
-
i got 100m of 6mm Microbore good stuf light to move around
-
might get some of varitechs new rubber inside microbore, although I see wintecs is doing it for 43quid plus vat for 100m
-
thats what i got i just let cars and lorries drive over mine strong as anything
-
so you'd recommend it?
is it as nice and flexible as they say it is?
-
its a bit stiff to start off with but within a month of winding in and out there is more play in it and its liter to move around and wind in as well
-
its a bit stiff to start off with but within a month of winding in and out there is more play in it and its liter to move around and wind in as well
stick that in hot water and it will sort that out ;) but to be honest you want the hose stiff as when it becomes plyable it is a right royal pain in the ...
-
8mm minibore. Never had a problem yet.
-
6mm mico 100 m