Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: peekeclean on January 05, 2008, 06:27:52 pm

Title: pole triggers
Post by: peekeclean on January 05, 2008, 06:27:52 pm

how do you stop the Nuematic George trigger from spinning on your pole??
iv used cable ties to hold it on like the photo on here.

cheers joe

Title: Re: pole triggers
Post by: dudek on January 05, 2008, 07:26:29 pm

Yeah i had the same problem mate what i did was cut a bit of hose the same length as the handle then split hose with a stanley knife and spread over the pole if you get me then re apply some cable ties.

it will still slide a bit but it was much improved for me and im yet to find the proper solution so give it a try.

dudek

Title: Re: pole triggers
Post by: williamx on January 05, 2008, 07:44:26 pm

I use a jubilee clip which has a key on the locking nut.

That way you can ajust the clip to move it either up or down the pole.

Title: Re: pole triggers
Post by: jouk45 on January 05, 2008, 08:10:10 pm

strip of heavy gauge self adesive velcro tape one on the pole other under the trigger, then add ties or jubilee clips, freedom use this method for their water flow control valves

Title: Re: pole triggers
Post by: windowwashers on January 05, 2008, 08:11:54 pm

Quote from: williamx on January 05, 2008, 07:44:26 pm

I use a jubilee clip which has a key on the locking nut.

That way you can ajust the clip to move it either up or down the pole.

talking about them I saw some on ebay yesterday that has a fob type thing to undo quick and easy.

Have to remember to buy some.

Ian

Title: Re: pole triggers
Post by: [GQC] Tim on January 06, 2008, 08:59:55 am

I use 3 zip ties, and it doesn't spin at all? You need to tighten em a bit more. :)