Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: need a cleaner on November 18, 2007, 11:51:53 pm
-
Hi i just instaled a new 300gpd RO in the garege and as i did with the first1 i left it to run for 2 hrs to wash all the chemicals from the system b4 starting production, i tested the TDS and it was reading 66, i left it another hr and still the same, now the water fore this RO is from the same tap, the RO is exactly the same as the other and i get only 10 TDS from the first RO so im very confused why i get 66 form this1, any sugestions or ideias on how to sort it would be very much apreciated :-\ :-\ :-\ ??? ???
-
Hi i just instaled a new 300gpd RO in the garege and as i did with the first1 i left it to run for 2 hrs to wash all the chemicals from the system b4 starting production, i tested the TDS and it was reading 66, i left it another hr and still the same, now the water fore this RO is from the same tap, the RO is exactly the same as the other and i get only 10 TDS from the first RO so im very confused why i get 66 form this1, any sugestions or ideias on how to sort it would be very much apreciated :-\ :-\ :-\ ??? ???
are you sure it is all connected the right way sounds to me it is not using filters just going straight through, i would take it apart and start again.
-
That occured to me aswell but it was already to l8 do check but i will try that 2morrow and compare all the connections with the other ::)
Just trying to see if is any other reason why this is happning as like the first1 this 1 was already assembled was just a plug and use ???