Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: *paul_moss on November 15, 2007, 05:57:16 pm

Title: Pipe length
Post by: *paul_moss on November 15, 2007, 05:57:16 pm

Done a job today and needed 250 ft of pipe just to get to her lounge  :o.Most jobs dont go past 100 ft.

Got me thinking, what is the longest pipe length any body has used ?

Title: Re: Pipe length
Post by: maxcarpets on November 15, 2007, 06:04:21 pm

My pipe has a long length!

Title: Re: Pipe length
Post by: lands on November 15, 2007, 06:09:54 pm

My pipe isn't that big but it sure has some girth

Title: Re: Pipe length
Post by: nevil on November 15, 2007, 06:30:21 pm

My pipe ( when fully extended ) is completly crush proof.

Title: Re: Pipe length
Post by: jon777 on November 15, 2007, 07:25:40 pm

My pipes bigger than your pipe !   :o

Title: Re: Pipe length
Post by: Shaun_Ashmore on November 15, 2007, 07:25:50 pm

Pete I heard that yours is a hida a hose ;D

Shaun

Title: Re: Pipe length
Post by: lands on November 15, 2007, 07:32:22 pm

Only when I've been for my 6am dip in the Channel (make that English Channel as I'm making it far too easy for an onslaught)

Title: Re: Pipe length
Post by: elliott cleaning on November 15, 2007, 09:25:27 pm

Paul
Just to give you a serious answer, 400 foot, but the suction left much to be desired

Title: Re: Pipe length
Post by: colin thomas on November 15, 2007, 10:02:31 pm

350ft and still pulling well, there is a certain person on another site who i believe goes 600ft regularly    :o

colin

Title: Re: Pipe length
Post by: liahona on November 16, 2007, 07:18:30 pm

Paul, I pretty much use 250 to 350 on most jobs that I do.  I have used 600 feet quite a few times with no reduction in either vaccuum or solution pressure, or heat over that distance.  I once coupled up a thousand feet just to see what happened.  Nothing compared to its normal ability or to another truck mount but would have still out performed a portable.

Best, Dave.

Title: Re: Pipe length
Post by: francis on November 16, 2007, 09:04:05 pm

Dave
Can you tell us what machine you use that shows no reduction of vacuum or heat over a 600' run

Title: Re: Pipe length
Post by: john rees on November 16, 2007, 09:17:17 pm

I've used my steamway equinox at 600 ft and that doesn't lose heat or vacuum at that lenth.

               all the best
                                John

Title: Re: Pipe length
Post by: Shaun_Ashmore on November 16, 2007, 10:21:45 pm

Dave what are you doing with a 1000ft of vac and solution hose? you're draping it down hill sides and using it to climb up are you?

Shaun

Title: Re: Pipe length
Post by: francis on November 16, 2007, 10:27:32 pm

That solution hose must have great insulation not to lose any heat over that distance John

Title: Re: Pipe length
Post by: Ian Rochester on November 16, 2007, 10:32:40 pm

Not to mention some size of van to haul it all around in :D

If this were the case I would just use the portable and be happy with it, running out 600ft or more defeats the object unless it is a HUGE job and you have a HUGE supply tank

Title: Re: Pipe length
Post by: richie on November 16, 2007, 11:35:43 pm

When i was cleaning night clubs 5 days per week i would run between 250-400 feet regular.    most ive run is 650 feet.  used to run 450 feet on my spitfire on a few jobs.  yes there was a loss of suction but nothing to bad.  heat was still good.  still, both were better than porty performance.   dont let Nick or John from CT here us all talking of such long hose runs and still good suction,  they will jump on our backs telling us that there wonder porty is as good or better.   HAHAHAHA :o

Richie.

Title: Re: Pipe length
Post by: *paul_moss on November 17, 2007, 04:52:51 pm

Richie I think the Scorpion now comes with a 2 inch port.

Title: Re: Pipe length
Post by: Dave Roelants on November 17, 2007, 05:23:07 pm

Wow

Title: Re: Pipe length
Post by: will_turton on November 17, 2007, 05:27:49 pm

think you bought the wrong machine now dave, i did tell you to UPGRADE didnt i?

Title: Re: Pipe length
Post by: calmore on November 17, 2007, 09:14:30 pm

This thread reminds me of a joke...

What's pink, wrinkly and hangs out yer trousers..?




Your mother, on washing day!

Title: Re: Pipe length
Post by: richie on November 17, 2007, 11:20:09 pm

OMG the Scorpion has a 2inch port!!!!!   it must mean that it will out perform the biggest of TMs now then.  Quick everybody sell your TMs & get a Super Scorpion with the AMAZING 2 inch port ;D

Richie.