Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Alistair@AWC on November 03, 2007, 05:15:10 pm
-
Hi Guys
Im in the process of fitting a couple of Varistream pump controllers and its all pretty straightforward except for one thing
The Varistream bypasses the pump pressure switch, now do I bypass the pressure switch by connecting the red wire from the pump to the Varistream or do I allow the wires to pass through the pressure switch then connect to the Varistream.
Any help would be appreciated
Al
-
No pressure switch needed with the varistream.
-
Hi Al
As far a i can remember you just remove the red wire that goes to pressure switch , on the top of the pump,
The red wire coming out of the bottom of the pump is what goes to the varistream.
John
-
Hi Al
As far a i can remember you just remove the red wire that goes to pressure switch , on the top of the pump,
The red wire coming out of the bottom of the pump is what goes to the varistream.
John
Give that man a gold star!!! ;D
Correct .. err except for there is a black wire as well as the red one left on the pump when u pull out the one from the pressure switch. ;)
-
Hi Al
As far a i can remember you just remove the red wire that goes to pressure switch , on the top of the pump,
The red wire coming out of the bottom of the pump is what goes to the varistream.
John
Give that man a gold star!!! ;D
Correct .. err except for there is a black wire as well as the red one left on the pump when u pull out the one from the pressure switch. ;)
Dam! forgot the black wire ;D
-
Right so you manually bypass the pressure switch then
Cool Cheers Guys