Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: martindrz400 on October 31, 2007, 05:04:04 pm

Title: alloy poles
Post by: martindrz400 on October 31, 2007, 05:04:04 pm
has anyone seen these poles need a longer pole and wandered what they are like looks a great pole for price
Title: Re: alloy poles
Post by: Nathanael Jones on October 31, 2007, 05:13:45 pm
The clamps look very awkward to use???
Title: Re: alloy poles
Post by: macmac on October 31, 2007, 05:15:50 pm
Is that the pole from streamsupplies?

tony
Title: Re: alloy poles
Post by: martindrz400 on October 31, 2007, 05:26:05 pm
yes
Title: Re: alloy poles
Post by: oliver collins on October 31, 2007, 05:26:27 pm
I had one once, nice and light but the sections keep pulling apart all parts are replacable which is good but the clamps are very arkward.
Oliver Collins
Title: Re: alloy poles
Post by: Wayne Thomas on October 31, 2007, 10:00:56 pm
Try and find out if the pole is the same dimensions (girth/diameter/width of pole) as the Tucker poles. If it is then you could fit Tucker's DIY Pennel clamp kit (approx £100) to make extending and collapsing the pole much easier. The Tucker pennel clamp's are a big improvement on the original worm gear clamps similar to those picture on the pole shown in your pic above. It's worth considering if same diameters as Tuckers.
Title: Re: alloy poles
Post by: Jon-scwindows on October 31, 2007, 11:00:51 pm
i have one of these alluminium poles exactly the same as in picture, 45ft length. Its good, its abit awkward with the clamps but if you set them up right- its only about 2-3 turns to clamp it, a little fiddly but strong poles and what im doing is taking it in 3 sections of several sections, depending on the job you can just fit them back together, but its pretty good and strong and light with 3 or 4 sections, a little harder to manage with all the sections but once you get it up if doing high windows its not very bad at all. i find it better having the hose velcroed along the outside for changing / taking out sections- the goose neck is very strong and the brush is very good- the pencil jets are pretty powerful, would have preffered spray jets, but then again would have preffered a superlight 2 !
its good - there are a few cheaper on ebay... from stream.
i would say good for high work, i would prefer it on low work but the brush head is quite big-  good for conservatories... you can oft for a smaller brush on the ebay ones.
i would definately get a superlight 2 next time, carbon fibre or fiberglass, fiberglass flexes much more, aluminium doesnt flex as much but is harder to lift up and down to the windows. nice and strong anyway.