Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Ian W on October 05, 2007, 11:10:44 pm
-
I have a few awkward windows that are just out of reach from a ladder.
I use a small unger pole that is about 2 feet long to reach them safely.
Is there a belt attachment for these so that I don't forget to take it up the ladder with me? ;D
-
Bump ;D
Anybody have any idea if there is a holster out there that would allow me to clip this to my belt?
Cheers
-
Bump ;D
Anybody have any idea if there is a holster out there that would allow me to clip this to my belt?
Cheers
I think Unger do one, I saw concept 20 use a belt that holds a hose pipe and thats made by unger i think, it have velcro strap. i WILL HAVE A LOOK ONLINE IN AN HOUR TO FIND A LINK FOR YOU, JUST HAVE TO GO TO diy SHOP TO GET SOME WET AND DRY FOR THE VAN and I hope thats the right stuff to use before protectorcoting it ::)
-
Bump ;D
Anybody have any idea if there is a holster out there that would allow me to clip this to my belt?
Cheers
JUST HAVE TO GO TO diy SHOP TO GET SOME WET AND DRY FOR THE VAN and I hope thats the right stuff to use before protectorcoting it ::)
Yes its is ;D
-
Bump ;D
Anybody have any idea if there is a holster out there that would allow me to clip this to my belt?
Cheers
JUST HAVE TO GO TO diy SHOP TO GET SOME WET AND DRY FOR THE VAN and I hope thats the right stuff to use before protectorcoting it ::)
Yes its is ;D
yes what is Jeff the wet'n'dry ?
-
Bump ;D
Anybody have any idea if there is a holster out there that would allow me to clip this to my belt?
Cheers
I hope thats the right stuff to use before protectorcoting it ::)
This question
-
Bump ;D
Anybody have any idea if there is a holster out there that would allow me to clip this to my belt?
Cheers
I hope thats the right stuff to use before protectorcoting it ::)
This question
nice one, been waiting for that all day ;D ;D ;D right can get started now 8)
-
Thanks Ian. I was looking at loads of sites, but I can't find anything that I could clip on my belt. Unger or otherwise. If you do find anything it would be great. Fed up of getting to the top of the ladder and then remembering the pole is at the bottom. lol
Good luck with the van!
-
Thanks Ian. I was looking at loads of sites, but I can't find anything that I could clip on my belt. Unger or otherwise. If you do find anything it would be great. Fed up of getting to the top of the ladder and then remembering the pole is at the bottom. lol
Good luck with the van!
If you can't find anything, then buy a hammer holster from most diy stores, that clips onto your belt.
-
That might be an idea Jeff. Perhaps I should be visiting B&Q not my local wc supplier. :)
-
Get yourself a pop rivetting gun and some rivets, find an old suitcase/briefcase or similar at your local bootfair and make as many holsters as you need, all designed to do exactly what you want.
-
B&Q sell power drill or hammer belt loops, one of those will do.
-
on all my pouches, unger and winspray i have a tool loop. my small pole fits in them easily enough
-
Well, sounds like a diy store might be the answer. I do have a loop on my unger pouch, but it doesn't seem like it would hold a pole.
-
I drill/hammer holster would be no good to hold a pole as the hole is to big, looked at a few in b&q today whilst I was getting insulation for my van.
I have just got in from doing it nearly there :) will check out the sites now to see if I can find that belt I was talking about.
-
http://scrimcity.co.uk/catalog/popup_image.php?pID=455&oscsid=980321c64d66375b86fb3c9b5b5e2b93
if this does not hold it in place enough, go to a pc shop and get a velcro cable tidy about £4 a pack of 2 this would do the job.
hopefully that link works or maybe this one:
http://scrimcity.co.uk/catalog/product_info.php?cPath=1_35&products_id=455&oscsid=980321c64d66375b86fb3c9b5b5e2b93
-
Thanks Ian. The Ergotec belt looks really good, but I was hoping to fit something to my standard belt. I will try a velcro thingy. I can nip into the local maplins tomorrow.
-
Get yourself a pop rivetting gun and some rivets, find an old suitcase/briefcase or similar at your local bootfair and make as many holsters as you need, all designed to do exactly what you want.
-
Thanks Ian. The Ergotec belt looks really good, but I was hoping to fit something to my standard belt. I will try a velcro thingy. I can nip into the local maplins tomorrow.
Your welcome m8 any time ;)
-
I can make myself a Samsonite holster ;D
-
I can make myself a Samsonite holster ;D
lmao