Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: geefree on October 02, 2007, 10:55:21 pm
-
Hi,
i worked as normal today,
came home , had food, then thought i would clean my own windows.
but my pump is making all the right noises, but not ,
pumping water,... i have to say i moved it earlier, and i may have put it at a different angle, but i have tried to change it around but cannot remember how it was.... do i have to have the pump in the van a certain way up?
grateful for any help.
Thanks.
-
I think it`s better to have pressure switch pointing downwards.
-
It's probably just drawing air somewhere at your inlet side. You probably disturbed it when you moved the pump.
Peter
-
thanks lads. ;)
-
try syphoning from yank then put hose on pump ;)
-
I'm having this problem ALL THE TIME :( Wasted an hour today going back to the van, getting the pump going, back to the pole... no pressure.... back to the van..... etc etc :-\ All the connections seem tight. Where could the air be coming from?
-
It certainly drives you up the wall.... i have tried sucking it out then re-attaching hose, no joy....
and today it all stopped totally, no power, nothing.
took a connection from the battery, after checking everything.... left it off two mins... put it back on..all started working again, an hour later same again.
baffled.
-
Sheepmeister
have you got a filter before the pump if so check it and clean it if necessary ::) i had this today and its verry annoying >:( >:(
btw how did you get on at the barn conversion ?????