Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: jampot on August 26, 2007, 02:03:52 pm
-
any 1 get pics of setup of the ro unit, tank in there garage?
im looking to set up my garage for make pure water just dont know where to start, any help will be great
-
start by getting a ro unit :) plumb it in which aint hard . then you got your pure water .
-
mine is in the shed ro system plumbed in pure water out of ro to a di vesile pure water from that in to storage tanks i have only just set mine upp and it will produce 250liters a day which is enought for me at the moment i tested my water tds out of tap then tested out of ro unit then out of di readings were
tap 252 tds
out of ro 8 tds
out of di vesil 000 tds
wast water should be alot higher than tap tds mine is 347 tds i thing like i say it is only a small set up but enough to do what i need if you want more pure water just get a bigger gpd ro unit and bigger storage tank also you need a transfer pump to pump your stored water to your vehicle which i have not done yet as it is stored in 25liter barrels which i pure in to my tank via a funnel untill i can get this sorted
-
Hope this helps a little....http://www.cleanitup.co.uk/smf/index.php?topic=41483.0#msg329577
It then goes into 2x500l tanks which are joined together (can be isolated), one of the tanks then has a transfer pump to get the water into the van.
Cheers
Dave.
-
thanx guys thats great :)
-
jampot
What is your tap tds?
-
my tap water is low ( i think) 85 pp Why mate?
-
my tap water is low ( i think) 85 pp Why mate?
If that is correct then you dont need an RO, just 2x 11Ltr DI vessels in sequence. fill tank in van from tap & pump through the DI vessels in van.
I run a 400ltr system this way & only use 2 bags of resin per year max, my tap tds is 96ppm. use DOWEX resin & you're sorted. pure water on demand & none of the hasstle of storage tanks / transfere pumps / RO systems etc.
tony