Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Chris Cottrell on August 02, 2007, 10:37:05 pm

Title: Tap connector
Post by: Chris Cottrell on August 02, 2007, 10:37:05 pm
Where do you get these from

The ones you use on the outside tap with JG fitting on the end that fits 1/4 RO tubing

I'm having some building work done soon so will need to temp set up the RO outside

Chris
Title: Re: Tap connector
Post by: D.Salkeld_Ltd on August 02, 2007, 10:38:52 pm
Chris,

Has RO Man got anything??

David
Title: Re: Tap connector
Post by: Chris Cottrell on August 02, 2007, 10:41:25 pm
Quote from: D.Salkeld_Ltd on August 02, 2007, 10:38:52 pm
Chris,

Has RO Man got anything??

David
there is one that says tap connector but it 1/2 to 3/8 not 1/4
Title: Re: Tap connector
Post by: D.Salkeld_Ltd on August 02, 2007, 10:49:07 pm
Chris,

I have a standard hose to 1/4 adapter on mine.  Maybe that might be the answer??

David
Title: Re: Tap connector
Post by: Chris Cottrell on August 02, 2007, 10:53:01 pm
I cant picture it Dave please explain does it connect to the end of your hose or does it connect some other way?

Chris
Title: Re: Tap connector
Post by: matt on August 02, 2007, 10:57:10 pm
just run the hose to any 1/4 RO tubing connection amd then heat up a end of a hosepipe and whack a jubilee clip over it

job done, its done me for over 3 years
Title: Re: Tap connector
Post by: D.Salkeld_Ltd on August 02, 2007, 11:13:18 pm
Chris,

This is the connector.  It is a Male Hoselock con with a 1/4 push con.

David
Title: Re: Tap connector
Post by: jouk45 on August 02, 2007, 11:23:29 pm
Quote from: Chris Cottrell on August 02, 2007, 10:37:05 pm
Where do you get these from

The ones you use on the outside tap with JG fitting on the end that fits 1/4 RO tubing

I'm having some building work done soon so will need to temp set up the RO outside

Chris
B&Q STOCK THEM, VERY HANDY,
Title: Re: Tap connector
Post by: Chris Cottrell on August 03, 2007, 07:46:24 am
Thats just what I need,Ill try B&Q

Dave were did you get yours ? was it B&Q aswell ?

Chris
Title: Re: Tap connector
Post by: easy on August 03, 2007, 08:07:31 am
Quote from: D.Salkeld_Ltd on August 02, 2007, 11:13:18 pm
Chris,

This is the connector.  It is a Male Hoselock con with a 1/4 push con.

David
Hi David,

What type is the other connector with the RO tubing inserted?I'll need one to modify my RO system...

cheers Tony
Title: Re: Tap connector
Post by: matt on August 03, 2007, 09:27:38 am
Quote from: D.Salkeld_Ltd on August 02, 2007, 11:13:18 pm
Chris,

This is the connector.  It is a Male Hoselock con with a 1/4 push con.

David

david, thats just what im after, where did you get that from  ?? ???
Title: Re: Tap connector
Post by: KarlJones on August 03, 2007, 02:00:35 pm
I would like one of these too, so if any suppliers are reading.
 :)
Title: Re: Tap connector
Post by: D.Salkeld_Ltd on August 04, 2007, 08:31:23 am
Hi Folks,

The connector came with my RO Man 100gpd setup I got from Cleantech.
There's one on the Inlet, Waste and Pure.

Give Cleantech a ring:
01563 550450

David
Title: Re: Tap connector
Post by: easy on August 04, 2007, 10:42:32 am
Quote from: D.Salkeld_Ltd on August 04, 2007, 08:31:23 am
Hi Folks,

The connector came with my RO Man 100gpd setup I got from Cleantech.
There's one on the Inlet, Waste and Pure.

Give Cleantech a ring:
01563 550450

David
David,
Would you know what size is the tubing you have.I have a RO Man 300gpd system here.
Cheers...
Title: Re: Tap connector
Post by: Chris Cottrell on August 04, 2007, 11:14:47 am
Quote from: easy on August 04, 2007, 10:42:32 am
Quote from: D.Salkeld_Ltd on August 04, 2007, 08:31:23 am
Hi Folks,

The connector came with my RO Man 100gpd setup I got from Cleantech.
There's one on the Inlet, Waste and Pure.

Give Cleantech a ring:
01563 550450

David
David,
Would you know what size is the tubing you have.I have a RO Man 300gpd system here.
Cheers...

1/4" its printed on the tubing itselfm, same as mine I guess

Chris
Title: Re: Tap connector
Post by: easy on August 04, 2007, 11:19:16 am
 
Chris,

Thanks for that,had a look,yes you right.....

Tony.