Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: m.b.s. on July 22, 2007, 09:11:11 pm
-
so if i want to connect it directly to my car battery once i have upgrsded it to the bigges t amps per hour what equiptment is then requred ie type of wire inline fuses on off switches ect: cheers :)
-
From a suitable motor factors get two colours of 10 amp wire, a 10 amp fuse holder and a switch rated to 10 amps. Run a feed back from your battery + terminal to where your pump is, wire in the 10 amp fuse and the switch. With the other colour wire pick up a good earth (perhaps from your rear lighting wiring), run both the positive and the earth to a double chocolate strip connector which you can then wire your pump to (this allows you to remove the pump without having to remove all of the wiring in the future).
-
whats a double chocolate strip any way cheers
-
Go into Halfords and ask for a chocolate strip connector. They will know what it is and then simply cut off two of the sections and use them.