Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: MJH on June 22, 2007, 09:11:50 pm

Title: Tds Help!!!
Post by: MJH on June 22, 2007, 09:11:50 pm

I have just changed RO's and i am having problems with my TDS!

I have installed a 4040 with prefilters, the tds after RO is 17 but when i put it through my DI chamber its still around 10, my resin is new so i know its not that and i have also experimented with the waste ratio to no avail!

Any tips would be great.

Matt

Title: Re: Tds Help!!!
Post by: steve k on June 22, 2007, 09:14:08 pm

they need running on full flush for a good couple of hours when new...turn the waste valve fully open so all water is going to waste

Title: Re: Tds Help!!!
Post by: MJH on June 22, 2007, 09:29:24 pm

Thanks steve, i have run a fair bit through waste already but i will give it another good blast in the morning cheers.

Title: Re: Tds Help!!!
Post by: Alex Wingrove on June 23, 2007, 12:38:45 am

is the resin tank full up as much as you can get in there,

if not it will go through the top and not pass through the resis

Title: Re: Tds Help!!!
Post by: steve k on June 23, 2007, 07:53:45 am

if its a blue resin vessel, the water is fed to the bottom of the resin via an internal pipe and then is filtered through to the outlet

Title: Re: Tds Help!!!
Post by: MJH on June 23, 2007, 11:45:44 am

Hi, it is a blue chamber and i have left an inch gap at the top of vessell!

Title: Re: Tds Help!!!
Post by: steve k on June 23, 2007, 01:21:01 pm

thats no problem